Procedure

1. Click power button   to Connect to the device. The  button indicates  device on status.
2. Set the input stimuli by selecting any of the radio button    having reset values.  Frequency and amplitude of the input square stimuli signal are assigned for each radio button. View the output on the  View the output on the membrane potential graph. 
3. Click  to apply input stimuli. Verify through the live video window whether the RED light is blinking or not. The selected input stimuli can be seen in the input stimuli panel  as : 
4. View the output on the membrane potential graph. 
5. Vary the input stimuli to see the effects of different stimuli inputs. 
6. Use  to pause the signal. Click to reset the whole experiment.
7. Click to reset the whole experiment..
8. To maximise and minimise each panels, click 
9. The PCB and circuit diagram can be viewed from the panel.
10. To switch between circuit diagrams and PCB use  botton.
11. This live video can be viewed from panels. 
12. To export the result of RT experiment select  or  formats. Select the signals to be exported. It will display as ​                                       Select the location to save the acquired data.
13. Switch of the device by clicking                                                                                                                                             For example start the experiments by connecting the device. Select the input stimuli with A=1Vpp and F=20Hz. Apply the input excitation to the analog neuron circuit by clicking start button. Maximize the live video window to verify whether device is running or not. The applied input stimuli and generated action potential can be viewed in the input stimuli and membrane potential graph respectively. Repeat the same procedure for other input stimuli. The user can also export the values which are chosen to get plotted on the graph using the Export Button. After clicking on this button, you can save your file at the specified location in .csv format and can use later by importing these values into either MS-Excel sheet or MATLAB for high resolution images.                                                                                                                                                                                                                                                                                                                       

    Note: If you are unable to access RT device or video, please clear your cache and refresh your browser. If problem persist, please contact Value@am.amrita.edu