Home
Project
Workshop
Nodal Centres
Apply for Nodal Centre Program
Nodal Centre List
Free online demo
Nodal Centre Inaugurations
Unique Login ID
News & Events
Publications
Survey
Faculty Survey
Student Survey
Contact us
Login
.
you are here->
home
->
Mechanical Engineering
->
Mechanics of Solids Labs
->
Creep Test
.
.
Creep Test
.
.
Introduction to MOS
Theory
Procedure
Self Evaluation
RT
Assignment
Reference
Feedback
1)
Creep is a potential failure mechanism caused due to
loading
temperature
time
all of the above
2)
In the primary stage creep the sharp rise is followed by relative readjustment to lower strain rate because
phase change
work hardening
yield
annealing
3)
Secondary stage creep has relatively lower strain rates due to
phase change
necking
work hardening and annealing
plastic deformation
4)
Tertiary creep is representative of
yield
annealing
hardening
necking
Cite this Simulator:
vlab.amrita.edu,. (2015). Creep Test. Retrieved 28 March 2024, from vlab.amrita.edu/?sub=77&brch=299&sim=1676&cnt=3
.....
.....
.....
Copyright @ 2024 Under the NME ICT initiative of MHRD
Powered by
Amrita
Virtual Lab Collaborative Platform
[ Ver 00.13. ]