PROCEDURE

 

 

 

                                                        

 

                                                                      ROLAND MODELA  PARTS

 

 

 

 

 

    CONNECT SCANNING PROBE

 

Start with port setting in your Computer

 

Step 1: 

Before start scanning object on 3D milling machine need to do settings with the system port.

1)      Click START -->Printer & faxes --> Right click on Roland Modela MDX-20 printer --> click on Properties -->click on Port tab --> select the

        port --> click on Apply & OK

 

Fig 1

 

 

                                                                 

2)      Right Click on --> MY COMPUTER --> click on Manage -->window will appear as shown in fig-2

 

 

Fig 2

 

3) Click on Device Manager Shown in above figure-3. Then Click on Ports (COM &LPT)

Fig 3

 

 

4) Double click on the Communication port --> then PORT tab 

Fig 4

 

5) Click on Advanced

 

Fig 5

 

 

 

6) Click on Start --> All Program --> Dr. Picza. Screen will appear of Dr. Picza scanning software,As shown in Fig-6

 

Fig 6

 

7) Go to --> File --> Preferences --> Do setting as Shown in following --> select COM1 --> Click OK ( See fig 7)

 

Fig 7

 

 

Set  X SCAN PITCH = 0.020

        Y SCAN PITCH = 0.020

        Z Bottom         = 0.394 (By Default)

 

Click on Scanning Area tab(Given in Red color)  in Controller following screen will appear as shown in fig-8.

 

 

Fig 8

 

As Given Below We can resize Blue window. & Even we can test area that we want to test . By clicking on

 

Begin Test Area (Given in Lavender color)

 

Following is the window  with Resized Blue rectangle to give specific area of scanning.

 

Fig 9

 

  And Click on FINE TAB & SMART SCAN

  At last we can start scan by Clicking on  

 

 

 

 

Fig 10

 

 

 

Fig 11

 

 

Fig 12

 

 

Fig 13

Fig 14

 

Fig 15

 

Fig 17

 

Fig 18

 

Fig 19

 

Fig 20

 

8) At last scanned image can be export in given format as shown in fig 21

 

Fig 21