. .
.
Series RL Circuits
.
.

 

Flash plugin EOL

Simulator link: https://vlab.amrita.edu/repo/PHY/BEC/ACCircuitSimulation/LCR%20Circuit%20Simulation.swf

 

Components:

 

  • Resistor: A resistor is a two-terminal electronic component that produces a voltage across its terminals that is proportional to the electric current through it in accordance with Ohm's law.
     
  • Lamp: A lamp is a replaceable component such as an incandescent light bulb, which is designed to produce light from electricity. These components usually have a base of ceramic, metal, glass or plastic, which makes an electrical connection in the socket of a light fixture.
     
  • Wire: A wire is a single, usually cylindrical, elongated string of metal. Wires are used to bear mechanical loads and to carry electricity and telecommunications signals. Wire is commonly formed by drawing the metal through a hole in a die or draw plate.
     
  • Switch: In electronics, a switch is an electrical component that can break an electrical circuit, interrupting the current or diverting it from one conductor to another.
     
  • Battery: In electronics, a battery or voltaic cell is a combination of many electrochemical Galvanic cells of identical type to store chemical energy and to deliver higher voltage or higher current than with single cells.
     
  • Voltmeter: A voltmeter is an instrument used for measuring the electrical potential difference between two points in an electric circuit. Analog voltmeters move a pointer across a scale in proportion to the voltage of the circuit; digital voltmeters give a numerical display of voltage by use of an analog to digital converter.
     
  • Ammeter: An ammeter is a measuring instrument used to measure the electric current in a circuit. Electric currents are measured in amperes (A), hence the name.
     
  • Non-contact ammeter: A type of ammeter that need not be a part of the circuit.

 

Procedure

 

1. Select the components from the right side of the simulator and connections are made as in the circuit diagram shown in Fig:1 in the theory.

2. Connection  is complete only when the black color appears at the  end of the wires.

 

 

Cite this Simulator:

.....
..... .....

Copyright @ 2024 Under the NME ICT initiative of MHRD

 Powered by AmritaVirtual Lab Collaborative Platform [ Ver 00.13. ]