Home
Project
Workshop
Nodal Centres
Apply for Nodal Centre Program
Nodal Centre List
Free online demo
Nodal Centre Inaugurations
Unique Login ID
News & Events
Publications
Survey
Faculty Survey
Student Survey
Contact us
Login
.
you are here->
home
->
Biotechnology and Biomedical Engineering
->
FAB laboratory
->
Molding and Casting of Polyurethane parts.
.
.
Molding and Casting of Polyurethane parts.
.
.
Aim
Pre Test
Theory
Procedure
Feedback
PRE-TEST
1)
A Molding is a process in which….
Mold is filled with a liquid and hardens
Mold is filled with a solid and liquefied
Mold is unfilled with a liquid and does nothing
Mold is filled with a gas and vaporize
2)
Blow molding is a process in which only..
Solid plastic parts are formed
Only hollow plastic parts are formed
Only thin plastic sheets are formed
Is not a plastic molding process
3)
Molds of Injection molding is made from
Tool steel
Stainless steel
Aluminum
All of above
4)
In casting process molds are made up of
Sand
Steel
Wood
All of above
5)
In Rubber compound molding
Only Silicon compound is used
Only Rubber compound is used
Only Urethane compound is used
Both Rubber and urethane compound is used
Cite this Simulator:
vlab.amrita.edu,. (2012). Molding and Casting of Polyurethane parts.. Retrieved 14 May 2024, from vlab.amrita.edu/?sub=3&brch=106&sim=1364&cnt=2852
.....
.....
.....
Copyright @ 2024 Under the NME ICT initiative of MHRD
Powered by
Amrita
Virtual Lab Collaborative Platform
[ Ver 00.13. ]