Home
Project
Workshop
Nodal Centres
Apply for Nodal Centre Program
Nodal Centre List
Free online demo
Nodal Centre Inaugurations
Unique Login ID
News & Events
Publications
Survey
Faculty Survey
Student Survey
Contact us
Login
.
you are here->
home
->
Electronics & Communications
->
Signals and Systems Laboratory
->
Exp-5 Analysis of LTI system response.
.
.
Exp-5 Analysis of LTI system response.
.
.
Objective
Theory
Procedure
Simulator
Quiz
Reference
Download
Feedback
Video
1)
The convolution between two signals is always
Symmetric
Antisymmetric
None of these
2)
Rxy[r] and Ryx[r] represent the cross-correlation between two signals x[n] and y[n] and that of their reversed order. Then which one of the following is correct
Rxy[r] = Ryx[-r]
Rxy[r] = Ryx[r]
Rxy[r] = -Ryx[r]
3)
In the setup of experiment 5(a), if signal x(r) is symmetric and signal h(r) is asymmetric then their cross-correlation and convolution would be
one and the same.
same but anti-symmetric.
time reversed version of each other.
4)
For any signal, the value of auto-correlation at any lag is
greater than the value of the auto-correlation at zero lag.
less than the value of the auto-correlation at zero lag.
less than equal to the value of the auto-correlation at zero lag.
5)
When can be the cross-correlation between two signals be symmetric about zero lag?
When one of them is symmetric, while other is asymmetric.
Both signals are symmetric.
Both signals are asymmetric.
6)
The value of auto-correlation function of a signal at zero lag represents
The value of the signal at time t=0 (or n=0).
The average value of the signal.
The energy of the signal.
7)
If (t1, t2) and (t3, t4) be the start & end point pairs of two time-limited signals x(t) and h(t), respectively. The start & end point pairs of convolution and cross-correlation of these signals would be
(t1+t2,t2+t4) and (t1-t3,t2-t3).
(t1+t3,t2+t4) and (t1-t4,t2-t3).
(t1+t3,t2+t3) and (t1-t4,t2-t3).
(t2+t3,t2+t3) and (t1-t3,t2-t3).
8)
The correlation of a signal with a shifted version of itself is known as
Cross-correlation.
Auto-correlation.
9)
The value of auto-correlation can never be bigger than it is at
Zero shift.
One shift.
Tau shift.
(Tau-t) shift.
Cite this Simulator:
vlab.amrita.edu,. (2011). Exp-5 Analysis of LTI system response.. Retrieved 6 May 2024, from vlab.amrita.edu/?sub=59&brch=166&sim=877&cnt=1608
.....
.....
.....
Copyright @ 2024 Under the NME ICT initiative of MHRD
Powered by
Amrita
Virtual Lab Collaborative Platform
[ Ver 00.13. ]