Home
Project
Workshop
Nodal Centres
Apply for Nodal Centre Program
Nodal Centre List
Free online demo
Nodal Centre Inaugurations
Unique Login ID
News & Events
Publications
Survey
Faculty Survey
Student Survey
Contact us
Login
.
you are here->
home
->
Mechanical Engineering
->
Mechanics of Solids Labs
->
Beam Theory I
.
.
Beam Theory I
.
.
Introduction to MOS
Theory
Procedure
Self Evaluation
RT
Assignment
Reference
Feedback
Data Set
1)
What is a linear elastic material?
A nano material
Where the stress is proportional to strain
A material that regains shape after loading
Any polymer
2)
What is Young's modulus?
The ratio of tensile stress to strain below elastic limit
A method of loading the material
Modulus of shear in the material
The maximum stress a material can take.
3)
What are the units of stress?
N/m2 or Mpa
Stress is dimensionless
Newtons
Metres
4)
What would happen if the material was not linear elastic?
We would get the same value of the young's modulus
We would get different values for the modulus
This experiment cannot be performed
The strain cannot be measured.
Cite this Simulator:
vlab.amrita.edu,. (2013). Beam Theory I. Retrieved 10 December 2024, from vlab.amrita.edu/?sub=77&brch=299&sim=1626&cnt=3
.....
.....
.....
Copyright @ 2024 Under the NME ICT initiative of MHRD
Powered by
Amrita
Virtual Lab Collaborative Platform
[ Ver 00.13. ]